5012PN |
5102PN |
|||
Technical Specifications |
||||
Size Range | 0.5 - 25.0 μm | |||
Channel Sizes | Standard: 0.5, 5.0μm Optional: 0.5, 10.0μm |
|||
Counting Efficiency | 50% at the minimum detectable size | |||
Flow Rate | 0.1 CFM (2.83 LPM) | 1.0 CFM (28.3 LPM) | ||
Laser Source | Laser Diode | |||
Zero Count Level | <1 count / 5 minutes (per JIS) | |||
Concentration Limits | 2,000,000 particles / ft³ @ 5% coincidence loss | 500,000 particles / ft³ @ 5% coincidence loss | ||
Calibration | ISO 21051-4 compliant ISO 17025 Accredited | |||
Sample Output | Internally filtered to HEPA standards (>99.997% @ 0.3μm) | |||
Vacuum Requirements | Internal Vacuum Pump | |||
Air Flow | Internally Monitored and Controlled | |||
Communication Modes | 4-20mA Output | |||
LED Indicators | Power, Service | |||
Connector | 8-pin Phoenix | |||
External Pump Switch | 2-pin Phoenix dry-contact relay | |||
Enclosure | NEMA Style 316L Stainless Steel or Powder Coated Steel | |||
Power | 110 / 220 VAC, 50-60Hz or 24VDC 100W | |||
Dimensions | 10” (w) x 12” (h) x 6.9” (d) [25.4 x 30.4 x 14.9 cm] | |||
Weight | AC Model, 20 lbs (9 kg); DC Model, 19.5 lbs (8.85 kg) | |||
Environmental Conditions |
||||
Operating | 50°F to 104°F (10°C to 40°C) / 20% to 95% non-condensing | |||
Storage | 14°F to 122°F (-10°C to 50°C) / Up to 98% non-condensing | |||
Accessories |
||||
Included | Operating Manual on CD; AC or DC Power Input Connector Kit | |||
Optional | Printed Operating Manual; Data Cable; Sample Tubing; 24VDC 100W Power Adapter (DC Model) |
Concept’s B1 is a robust and fully portable smoke system, operating from an on board 12vDC battery.
With a 400w heat exchanger, the B1 is capable of producing a good volume of safe, controllable smoke on demand in areas where no mains power is available, making this is an invaluable tool for air tracing, fire training, road traffic collision simulations, leak detecting etc.
With the standard unit a maximum output, up to 10 minutes of smoke can be produced. If longer running periods are required an optional external battery connector can be used, this can provide up to 2 hours of smoke.
A suitable 110v/230v AC charger is included with every unit. Spare battery packs, remote control leads and radio remote control systems are all available as optional extras.
Power | 12vDC / 60A |
Heat Exchanger | 400W |
Smoke Output | Up to 10 mins at maxs output |
Fluid Consumption | 10ml/minute |
Size | 220 x 105 x 210 mm high |
Weight | 5.5 kg |
Battery Capacity / Charging Time | 200 ≤ X ≤ 400 |
SERVICE & CALIBRATION