5012PN |
5102PN |
|||
Technical Specifications |
||||
Size Range | 0.5 - 25.0 μm | |||
Channel Sizes | Standard: 0.5, 5.0μm Optional: 0.5, 10.0μm |
|||
Counting Efficiency | 50% at the minimum detectable size | |||
Flow Rate | 0.1 CFM (2.83 LPM) | 1.0 CFM (28.3 LPM) | ||
Laser Source | Laser Diode | |||
Zero Count Level | <1 count / 5 minutes (per JIS) | |||
Concentration Limits | 2,000,000 particles / ft³ @ 5% coincidence loss | 500,000 particles / ft³ @ 5% coincidence loss | ||
Calibration | ISO 21051-4 compliant ISO 17025 Accredited | |||
Sample Output | Internally filtered to HEPA standards (>99.997% @ 0.3μm) | |||
Vacuum Requirements | Internal Vacuum Pump | |||
Air Flow | Internally Monitored and Controlled | |||
Communication Modes | 4-20mA Output | |||
LED Indicators | Power, Service | |||
Connector | 8-pin Phoenix | |||
External Pump Switch | 2-pin Phoenix dry-contact relay | |||
Enclosure | NEMA Style 316L Stainless Steel or Powder Coated Steel | |||
Power | 110 / 220 VAC, 50-60Hz or 24VDC 100W | |||
Dimensions | 10” (w) x 12” (h) x 6.9” (d) [25.4 x 30.4 x 14.9 cm] | |||
Weight | AC Model, 20 lbs (9 kg); DC Model, 19.5 lbs (8.85 kg) | |||
Environmental Conditions |
||||
Operating | 50°F to 104°F (10°C to 40°C) / 20% to 95% non-condensing | |||
Storage | 14°F to 122°F (-10°C to 50°C) / Up to 98% non-condensing | |||
Accessories |
||||
Included | Operating Manual on CD; AC or DC Power Input Connector Kit | |||
Optional | Printed Operating Manual; Data Cable; Sample Tubing; 24VDC 100W Power Adapter (DC Model) |
The Positive Injection Pump (PIP) provides the user with a safe system for the direction of aerosol from a Thermal Generator or Laskin Nozzle Generator to the point of use.
Aerosol is drawn into the PIP at its suction point and ejected under pressure through a large bore flexible pipe.
The tubing supplied can be connected directly to DOP injection ports and sparge pipes and makes it possible to inject aerosol into positive pressure zones or air handling units, clean air and containment systems and enhances mixing.
Speed control allows for regulation of the discharge velocity, which is essential when introducing aerosol at apertures of various size.
Features
SERVICE & CALIBRATION