Concept B1

Technical Details




Technical Specifications

Size Range 0.5 - 25.0 μm
Channel Sizes Standard: 0.5, 5.0μm
Optional: 0.5, 10.0μm
Counting Efficiency 50% at the minimum detectable size 
Flow Rate 0.1 CFM (2.83 LPM) 1.0 CFM (28.3 LPM)
Laser Source Laser Diode
Zero Count Level <1 count / 5 minutes (per JIS)
Concentration Limits 2,000,000 particles / ft³ @ 5% coincidence loss 500,000 particles / ft³ @ 5% coincidence loss
Calibration ISO 21051-4 compliant ISO 17025 Accredited
Sample Output Internally filtered to HEPA standards (>99.997% @ 0.3μm)
Vacuum Requirements Internal Vacuum Pump
Air Flow Internally Monitored and Controlled
Communication Modes 4-20mA Output
LED Indicators Power, Service
Connector 8-pin Phoenix
External Pump Switch 2-pin Phoenix dry-contact relay
Enclosure NEMA Style 316L Stainless Steel or Powder Coated Steel
Power 110 / 220 VAC, 50-60Hz or 24VDC 100W
Dimensions 10” (w) x 12” (h) x 6.9” (d) [25.4 x 30.4 x 14.9 cm]
Weight AC Model, 20 lbs (9 kg); DC Model, 19.5 lbs (8.85 kg)

Environmental Conditions

Operating 50°F to 104°F (10°C to 40°C) / 20% to 95% non-condensing
Storage 14°F to 122°F (-10°C to 50°C) / Up to 98% non-condensing


Included Operating Manual on CD; AC or DC Power Input Connector Kit
Optional Printed Operating Manual; Data Cable; Sample Tubing; 24VDC 100W Power Adapter (DC Model) 

Get a Quote


First Name (*)
Last Name (*)
Company Name (*)
Email (*)
Phone (*)
Address (*)
Country (*)
Primary Industry (*)
Message (*)
(*) Required Fields

Smoke Machine

  • Instant, safe smoke on demand
  • No warm up time, instant smoke
  • Dense, controllable smoke 
  • Completely portable 
  • Simple to Operate
  • Low fluid consumption (10 ml/min at max output)
  • Can produce smoke for up to 10 mins at max output 
  • Optional radio remote, wired remote and battery packs, DMX, TIMER etc

Concept’s B1 is a robust and fully portable smoke system, operating from an on board 12vDC battery. 

With a 400w heat exchanger, the B1 is capable of producing a good volume of safe, controllable smoke on demand in areas where no mains power is available, making this is an invaluable tool for air tracing, fire training, road traffic collision simulations, leak detecting etc.  
With the standard unit a maximum output, up to 10 minutes of smoke can be produced. If longer running periods are required an optional external battery connector can be used, this can provide up to 2 hours of smoke. 
A suitable 110v/230v AC charger is included with every unit. Spare battery packs, remote control leads and radio remote control systems are all available as optional extras.

Power12vDC / 60A
Heat Exchanger400W
Smoke Output    Up to 10 mins at maxs output
Fluid Consumption    10ml/minute
Size220 x 105 x 210 mm high
Weight5.5 kg
Battery Capacity / Charging Time 200 ≤ X ≤ 400