Technical Details




Technical Specifications

Size Range 0.5 - 25.0 μm
Channel Sizes Standard: 0.5, 5.0μm
Optional: 0.5, 10.0μm
Counting Efficiency 50% at the minimum detectable size 
Flow Rate 0.1 CFM (2.83 LPM) 1.0 CFM (28.3 LPM)
Laser Source Laser Diode
Zero Count Level <1 count / 5 minutes (per JIS)
Concentration Limits 2,000,000 particles / ft³ @ 5% coincidence loss 500,000 particles / ft³ @ 5% coincidence loss
Calibration ISO 21051-4 compliant ISO 17025 Accredited
Sample Output Internally filtered to HEPA standards (>99.997% @ 0.3μm)
Vacuum Requirements Internal Vacuum Pump
Air Flow Internally Monitored and Controlled
Communication Modes 4-20mA Output
LED Indicators Power, Service
Connector 8-pin Phoenix
External Pump Switch 2-pin Phoenix dry-contact relay
Enclosure NEMA Style 316L Stainless Steel or Powder Coated Steel
Power 110 / 220 VAC, 50-60Hz or 24VDC 100W
Dimensions 10” (w) x 12” (h) x 6.9” (d) [25.4 x 30.4 x 14.9 cm]
Weight AC Model, 20 lbs (9 kg); DC Model, 19.5 lbs (8.85 kg)

Environmental Conditions

Operating 50°F to 104°F (10°C to 40°C) / 20% to 95% non-condensing
Storage 14°F to 122°F (-10°C to 50°C) / Up to 98% non-condensing


Included Operating Manual on CD; AC or DC Power Input Connector Kit
Optional Printed Operating Manual; Data Cable; Sample Tubing; 24VDC 100W Power Adapter (DC Model) 

Get a Quote


First Name (*)
Last Name (*)
Company Name (*)
Email (*)
Phone (*)
Address (*)
Country (*)
Primary Industry (*)
Message (*)
(*) Required Fields

The Positive Injection Pump (PIP) provides the user with a safe system for the direction of aerosol from a Thermal Generator or Laskin Nozzle Generator to the point of use. 
Aerosol is drawn into the PIP at its suction point and ejected under pressure through a large bore flexible pipe.  
The tubing supplied can be connected directly to DOP injection ports and sparge pipes and makes it possible to inject aerosol into positive pressure zones or air handling units, clean air and containment systems and enhances mixing. 
Speed control allows for regulation of the discharge velocity, which is essential when introducing aerosol at apertures of various size. 


  • Adjustable swan-neck inlet works with any model of Aerosol Generator. The Aerosol Generator simply stands on the floor in line with the PIP.
  • Mounted on a stainless steel base with rubber feet to suit all floor types and prevent movement when in use.
  • Aerosol is directed to the injection point using the 5cm diameter flexible pipe, provided in a 10-meter length.
  • Aerosol can be injected into positive pressure zones up to 100mbar.
  • PIP power provides enhanced mixing by injecting against or across the normal system airflow.
  • Aerosol is available remote from the air blower and aerosol generator – up to 20 meters away if required. This means you no longer need to take the complete aerosol generator into the clean environment – just the flexible pipe.
  • Speed control version allows precision control of sparge pipe aerosol curtain for testing clean air cabinets and Microbiological Safety Cabinets.