5D Thermal Aerosol Generator

Technical Details




Technical Specifications

Size Range 0.5 - 25.0 μm
Channel Sizes Standard: 0.5, 5.0μm
Optional: 0.5, 10.0μm
Counting Efficiency 50% at the minimum detectable size 
Flow Rate 0.1 CFM (2.83 LPM) 1.0 CFM (28.3 LPM)
Laser Source Laser Diode
Zero Count Level <1 count / 5 minutes (per JIS)
Concentration Limits 2,000,000 particles / ft³ @ 5% coincidence loss 500,000 particles / ft³ @ 5% coincidence loss
Calibration ISO 21051-4 compliant ISO 17025 Accredited
Sample Output Internally filtered to HEPA standards (>99.997% @ 0.3μm)
Vacuum Requirements Internal Vacuum Pump
Air Flow Internally Monitored and Controlled
Communication Modes 4-20mA Output
LED Indicators Power, Service
Connector 8-pin Phoenix
External Pump Switch 2-pin Phoenix dry-contact relay
Enclosure NEMA Style 316L Stainless Steel or Powder Coated Steel
Power 110 / 220 VAC, 50-60Hz or 24VDC 100W
Dimensions 10” (w) x 12” (h) x 6.9” (d) [25.4 x 30.4 x 14.9 cm]
Weight AC Model, 20 lbs (9 kg); DC Model, 19.5 lbs (8.85 kg)

Environmental Conditions

Operating 50°F to 104°F (10°C to 40°C) / 20% to 95% non-condensing
Storage 14°F to 122°F (-10°C to 50°C) / Up to 98% non-condensing


Included Operating Manual on CD; AC or DC Power Input Connector Kit
Optional Printed Operating Manual; Data Cable; Sample Tubing; 24VDC 100W Power Adapter (DC Model) 

Get a Quote


First Name (*)
Last Name (*)
Company Name (*)
Email (*)
Phone (*)
Address (*)
Country (*)
Primary Industry (*)
Message (*)
(*) Required Fields

The 5D Thermal Aerosol Generator is designed for operators who require a wide range of aerosol output concentrations to perform leak tests on smaller clean air cabinets through cleanroom air handling systems.
It is the high capacity solution used in demanding industries.

Save time and money in the most demanding multi-filter cleanroom installations.
In high-volume HEPA and ULPA airflow environments, the 5D can significantly reduce the time it takes to conduct filter leak test scans, generating aerosol concentrations that can challenge the largest Air Handling Unit (AHU) configurations.
With 1- to 2-minute warmup and cool-down times, begin testing high-flow systems without waiting, and be ready to store and move the unit minutes after the job is complete.

Rugged Portability
The 5D components are housed in a stainless-steel enclosure designed to withstand the rigors of portable filtration-system certification.
Its lightweight, slim profile and supplied hand and shoulder straps make it an everyday, portable aerosol generator.

Generating the widest aerosol concentration range available, the 5D accommodates both high- and low-flow environments, from cabinets to the most demanding cleanroom installations. And with flex-fuel capability, the
5D can use any reagent, including DOP (DEHP), PAO-4, DOS (DEHS), Ondina, or mineral oil.